Sonnet-technologies G5 Jive Bedienungsanleitung PDF herunterladen (Seite 4)

Figure 12

Figure 11

Figure 10

Installation Steps for Power Mac G5 with PCIe Slots

Install G5 Jive Base Plate

1. Locate and remove the screw from the ﬂoor of the computer in

front of the RAM slots (Figure 9).

2. Insert the G5 Jive’s base plate into the computer with the long

folded edge face down and the raised tab facing out (Figure 10)

3. Slide the folded edge of the base plate over the front edge of the

computer’s ﬂoor, and align the base plate’s screw hole with the

screw hole in the ﬂoor (Figure 10)

4. Using the provided long screw, secure the base plate to the com-

puter; do not overtighten the screw (Figure 11)

Install Drives into G5 Jive Drive Mounting Bracket

1. Set the drive mounting bracket on its side with the raised tab fac-

ing left (Figure 12).

2. Handling it by its edges, insert a Serial ATA drive into the drive

bracket with the drive’s label facing you, and then align the holes

in the bracket with the screw holes in the drive (Figure 12)

3. Using the provided drive mounting screws, secure the drive to

the drive mounting bracket (Figure 12)

4. Repeat steps 1-3 for any additional drives.

tab

base plate

screw (provided)

tab

SATA drive

tab

screw (provided)

folded edge

Figure 9

screw

1 2 3 4 5 6 7 8 9 ... 14 15

Keine Kommentare

Sonnet-technologies G5 Jive Bedienungsanleitung Seite 4