Sonnet-technologies G5 Jive Bedienungsanleitung PDF herunterladen (Seite 11)

Figure 38

Figure 37

Figure 36

Figure 35

Installation Steps for Power Mac G5 with PCI-X Slots

2. Insert the G5 Jive’s base plate into the computer with the long

folded edge face down and the raised tab facing out (Figure 35)

3. Slide the folded edge of the base plate over the front edge of the

computer’s ﬂoor, and align the base plate’s screw hole with the

screw hole in the ﬂoor (Figure 35)

4. Using the provided long screw, secure the base plate to the com-

puter; do not overtighten the screw (Figure 36)

Install Drives into G5 Jive Drive Mounting Bracket

1. Set the drive mounting bracket on its side with the raised tab fac-

ing left (Figure 37).

2. Handling it by its edges, insert a Serial ATA drive into the drive

bracket with the drive’s label facing you, and then align the holes

in the bracket with the screw holes in the drive (Figure 37)

3. Using the provided drive mounting screws, secure the drive to

the drive mounting bracket (Figure 37)

4. Repeat steps 1-3 for any additional drives.

Install Drives into Computer

1. Connect the right-angle connectors from the supplied SATA

data cables to the drives; verify the connectors are plugged in

securely

(Figure 38).

tab

base plate

screw (provided)

tab

SATA drive

tab

screw (provided)

data cable

folded edge

PCI-X Power Mac G5 Install

1 2 ... 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Sonnet-technologies G5 Jive Bedienungsanleitung Seite 11