Sonnet-technologies Presto Plus Processor Upgrade with Mac OS 8 Bedienungsanleitung Seite 11
- Seite / 11
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
10. Gently press down until the Presto Plus card is firmly seated in the PDS
slot (Figure 6). If you encounter any resistance, lift the card out of the
PDS slot, check for bent pins, and reinstall the card.
11. Replace the case cover onto your computer (Figure 7).
12. Return your Macintosh to your computing area and reconnect the
power and peripheral cables to the computer.
13. Affix the Powered by Sonnet label (Figure 8) to the front of your
computer.
14. Turn on your Macintosh. You should see the Presto extension icon load
during startup.
15. The Presto Plus processor upgrade card has an onboard RAM expansion
SIMM slot with a 32 MB SIMM that adds additional RAM to your
system. For example, if your computer has 10 MB of RAM the Presto
Plus adds an additional 32 MB for a total of 42 MB. To determine the
amount of RAM available to your system, select “About this Macintosh”
or “About This Computer” (depending on the installed System software)
from under the Apple Menu.
16. The Presto Plus features 10BaseT Ethernet via a RJ45 Ethernet port. If
you intend to connect your Macintosh to an Ethernet network, you will
require an unshielded twisted-pair (CAT 3-5 UTP) cable. You will also
need to configure the system software (via AppleTalk and TCP/IP control
panels) to recognize proper Ethernet settings.
Two LED indicators on the Presto Plus provide status information for
verification and diagnostic purposes:
• The LED Link indicator (Figure 9) indicates a valid connection to
a network. When a connection is established, the LED is on; if a
connection is not detected, the LED should be off.
• The LED Transmit indicator (Figure 9) indicates the transmission of
data. When on, the LED should blink on as data is being transmitted.
When no data is being sent, the LED should be off.
Presto Plus Installation Instructions for Macintosh LC, LC II, LC III; and Performa 250-450
2
Figure 6: Gently press Presto Plus card into PDS slot
Figure 7: Replace case cover
Figure 8: Powered by Sonnet label
Figure 9: Ethernet LED indicators
Link
Transmit
Verwandte Produkte und Handbücher für Hardware Sonnet-technologies Presto Plus Processor Upgrade with Mac OS 8
Hardware Sonnet-technologies Encore_ST G4 1.8 Ghz Processor Upgrade Card Bedienungsanleitung
(15 Seiten)
(15 Seiten)
Hardware Sonnet-technologies Encore_ST G4 (1.4 GHz and Slower) Processor Ugrade Bedienungsanleitung
(15 Seiten)
(15 Seiten)
Hardware Sonnet-technologies Encore_ST G4 Duet (With No Heatsink) Processor Upg Bedienungsanleitung
(5 Seiten)
(5 Seiten)
Hardware Sonnet-technologies Encore_ST G4 Duet 1.7 GHz Processor Upgrade Card Bedienungsanleitung
(15 Seiten)
(15 Seiten)
Hardware Sonnet-technologies Encore_ST G4 Duet 1.4 GHz or Slower Processor Upgr Bedienungsanleitung
(16 Seiten)
(16 Seiten)
Hardware Sonnet-technologies Encore_MDX G4 Duet Dual Processor Upgrade Card Bedienungsanleitung
(14 Seiten)
(14 Seiten)
(120 Seiten)YARDGARD 308854A manuály
Uživatelské manuály a uživatelské příručky pro ne YARDGARD 308854A.
Poskytujeme 1 manuály pdf YARDGARD 308854A ke stažení zdarma podle typů dokumentů: Manuál s instrukcemi
Kommentare zu diesen Handbüchern